Directional pattern: Cardioidspecial-dmtPrinciple of operation: Pressure gradientspecial-dmtCartridge type: Pre-polarized condenserspecial-dmtEffective frequency response: 20 Hz - 20 kHzspecial-dmtFrequency range, ±2 dB, at 30 cm (11.8 in): 40 Hz - 20 kHzspecial-dmtSensitivity, nominal, ±2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Paspecial-dmtEquivalent noise level, A-weighted: Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))special-dmtEquivalent noise level, ITU-R BS.468-4: Typ. 25 dBspecial-dmtDistortion, THD < 1%: 136 dB SPL RMS, 139 dB SPL peakspecial-dmtDynamic range: Typ. 121 dBspecial-dmtMax. SPL, THD 10%: 144 dB SPL peakspecial-dmtRated output impedance: 100 Ωspecial-dmtMinimum load impedance: 2 kΩspecial-dmtCable drive capability: 100 m (328 ft)special-dmtOutput balance principle: Impedance balancing special-dmtCommon mode rejection ratio (CMRR): > 40 dBspecial-dmtPower supply (for full performance) : 48 V Phantom power (± 4 V)special-dmtCurrent consumption : 3.5 mAspecial-dmtConnector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phasespecial-dmtColor: Matte blackspecial-dmtMicrophone diameter: 19 mmspecial-dmtCapsule diameter: 19 mmspecial-dmtMicrophone length: 35 mmspecial-dmtMaximum output voltage, RMS >: 2.2Vspecial-dmtPolarity: +V at pin 2 for positive sound pressurespecial-dmtTemperature range: -40°C to 45°C (-40°F to 113°F)special-dmtRelative humidity (RH): Up to 90%special-dmtMatching tolerance (frequency response and sensitivity): ±1 dBspecial-dmtPhase deviation for kit: < 10°special-dmt